Paint and floors! (mud room progress)

Well when I said I wanted to get my hands dirty again I meant it. I worked my TAIL off on the mud room yesterday! Seven hours straight – it feels like I’ve barely made a dent and like it looks like a whole new room all at once.

My hand is now a claw from gripping the paint brush so long, but there’s progress!

After I installed the new door trim my next step was to figure out what color to go with on the beadboard in the room. I shared the options I was looking into on Facebook:

I was deciding between a navy blue tone and a more peacock blue color and went with the latter – I’m a little obsessed with that color. I used it as an accent in the powder room, in the basement bathroom and I’ve used it in the living room too. LOVE.

Thing is – painting beadboard is a major pain in the tuckus. Seriously up there with the most tedious jobs ever. I start by using a roller over the whole thing, not worrying about getting into the grooves. Then I take a thick, angled brush and fill in the “beads”:

I use lots of paint, don’t be afraid to lather it on there. You have to go over it a few times to smooth it all out and get any excess paint out. THIS is why I feel like my hand is permanently in the claw shape. ;)

This time, for what I think may be the first time, I painted my trim before I installed it. What WHUT? Yep. I ALWAYS install first, then paint, and I ALWAYS complain about painting after the fact. I still don’t know if I’m sold on the painting before thing. It did make it a little easier – I didn’t have to worry about taping anything off.

But I still had to fill nail holes and touch up paint that I usually don’t have to worry about. Since I used such a deep color, I knew filling the holes would leave a white spot I’d have to paint over a couple times, so I mixed up a bit of my putty with some paint:

That way it matched the wall color better. Even after it dried it was still a little lighter:

I wiped it with a wet rag and then just touched up those small areas. So, the jury’s still out on the paint or install first, at least for me. I think it may be a bit easier to paint first though. Maybe.

So the blue color is called Reflecting Pool by Ralph Lauren. I’ve had an old paint deck for years from when they sold it at Home Depot (I would get it mixed in Behr paint). This time I took it to Sherwin Williams and got it color matched. I do love it but it’s more color than I’m used to, that’s for sure! When I’m in the room it feels deep and pretty. When I’m in another room and walk into the mud room it feels BRIGHT. :) But Lordy…I’m not painting it again for awhile so I’ll get used to it:

I did something a little different this time – usually the white is on the beadboard and the color is on the walls. I wanted to flip it around this time and I really like it! Now I’m not sure the door will stay that color though. It’s always trial and error for me – I just have to figure it out along the way.

It takes me eons to put a room together but that’s because I have to think through every bit of it:

I’ve had half of the walls covered with the beadboard for years, but never finished it up because I was too lazy to move the washer and dryer back in the day:

Next up I need to continue that around to the rest of the room that will be the built in bench and storage:

Those holes are where we had the dryer vent and heavy duty outlet – still don’t think I’ll even cover those with drywall since I’ll be covering it all with beadboard.

Oh I almost forgot about my FAVORITE part! The new floors!! Our flooring guy put them in for a great price again, $300 for labor. Now that I’ve watched him do it a few times I feel like I may be able to do this myself. But they make it seem so easy – they move super fast and just two of them had the floor laid in a couple hours:

I still need to add some trim over by the utility doors – I was more concerned with how they met at the transition piece to the rest of the house than over there. We went with the Jacobean stain and a satin poly like we have on the rest of the main level. After living with hardwoods for a couple years now I would use them in just about any space – even one that gets wet shoes. They’ve held up incredibly well! Any time we’ve ever had water stand on them at all they may cup up a bit but then once they dry out they’re flat again.

You may remember I installed the peel and stick vinyl tiles in here years ago – and they held up OK. Not great, but OK. The “grout” area between the tiles easily discolored, which I didn’t like. And I don’t feel like they’d be great for an area that gets moisture – the water would easily get between them. But the tiles themselves looked pretty darn good, even after years of use. I just didn’t care for the way the the grout areas looked after all this time.

If you had told me a few years ago we’d put hardwoods in both a bathroom and the mud room I would have laughed – but I’m a convert. :)

Next up – finish up the rest of the beadboard (I was waiting to decide on the bench configuration), then figure out the trim that will go around the top of the beadboard: Oh and paint the door trim. :) Yay.

THEN I can start the bench! I’m so excited about that! 

I can’t wait to make more progress in this room – and to create more storage! I’m stoked.

I’m just glad the bright yellow and black is gone:

It served us well but I’m ready for I’m ready for a change!

NOW I’m off to clean my entire house. When we’re all here 24/7 it’s so hard to keep up with it!! I want to start the new year with a clean slate! I’ll be back a couple more times this week, talk with ya later. ;)